| Design : |
3-way 3-units. Rear bass-reflex |
| Frequency response : |
32Hz-40kHz |
| Sensitivity : |
90dB/W/m |
| Impedance : |
8 ohms (Minimum 6.4 ohms) |
| Power requirement : |
50-200W recommended |
|
|
| Tweeter : |
Model: G3i, Aluminium Ribbon type (Ribbon dimension (LWT): |
|
100mm×8.5mm×0.01mm), high power handling(50W), high output (98dB/W/m), easily field-replaceable, shielded design |
|
|
| Midrange : |
Model: AC120/50CK, 4.8"/120mm, NON-WOVEN CARBON FIBER +KEVLAR CONE, 2"/50mm copper clad aluminium voice coil with flat wire, short circuit copper ring in the centre magnet pole, 120mm×T20mm Y30 Ferrite magnet, long throw. |
|
|
| Woofer : |
Model: AC200/50C2C, 8"/200mm, Sandwich cone ( NON-WOVEN CARBON FIBER+CELL 2mm + NON-WOVEN CARBON FIBRE), 2"/50mm copper clad aluminium voice coil with flat wire, short circuit copper ring in the centre magnet pole, 120mm×T20mm Y30 Ferrite magnet, long throw. |
|
|
| Crossover frequency : |
200Hz and 2300Hz |
| Crossover's attenuation slope : |
woofer -12dB, midrange -6dB,tweeter -18dB |
| Crossover parts : |
M-Cap Supreme MKP series capacitors are used for crossover of tweeter, Aurum Cantus polypropylene capacitor and nonpolarity electrolytic capacitor are used for the crossover of mid/woofer, 5N OFC inductor and metallic oxide film resistor and ceramic resistor |
|
|
| Connective wire : |
Aurum Cantus OCC 1.5mm2 Teflon insulated cable is used for tweeter and midrange, and Aurum Cantus OCC 2.5mm2 Teflon insulated cable is used for woofer. |
|
|
| Absorbing material : |
Polyester fibre and sponge ; |
| Connections : |
4pcs custom-made 18mm gold-plated copper binding post, bi-wire design |
| Cabinet material : |
MDF with high quality finish |
| Standard Finish : |
Matt rosewood and cherrywood. |
| Dimension of the cabinet (HWD) : |
110cm×25.4cm×35.2cm, this height is exclusive of spikes and the depth is exclusive of the grill). |